CLR2060 — Clear Ice Maker
www.U-LineService.com
4
02/2005
™
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides or rear.
However, the front grille must NOT be obstructed and
clearance is required for water, drain and electrical
connections in the rear.
Note:
Unit can NOT be installed behind a closed cabinet
door.
Cut-Out Dimensions
Follow the cut-out drawing in
Figure 1
. The 15-3/16"
width allows 1/4" for ease in installation and removal of
the unit. The 24" depth is the counter depth in most
installations. The unit is 24" deep including the handle
on Black and White models and 24" deep including the
door and
not
the handle on Stainless Steel models (see
Figure 2
).
IMPORTANT
If you would like to align the face of the unit with other
adjacent cabinet doors in certain installations, you may
need to alter the wall just behind the drain connection on
the unit to accommodate the drain. The actual amount of
alteration will be determined by your actual drain
connection components.
Product Dimensions
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see
Figure 44
on
Page
17
.)
Door Swing/Clearances Information
Black and White units have a zero clearance for the door
to open 90° (see
Figure 3
). Stainless Steel models require
a minimum of 2-1/8" door clearance to accommodate the
handle if the unit is installed next to a wall or similar type
of structure.
3 Prepare Site
See Electrical
Specifications
for Power Supply
34-1/4"
to
35-1/8"
15-3/16"
8"
24"
Figure 1
34-1/8"
34-1/8"
26-1/8"
Including
Handle
24"
Including
Handle
14-15/16"
Black and White
14-15/16"
Stainless Steel
Figure 2
1/4" Min.
Wall
21-3/4"
Wall
16-1/2"
21-3/4"
16-1/2"
2-1/8" Min.
90
°
Door Swing
90
°
Door Swing
Black and White
Stainless Steel
Figure 3
