SAFETY • INSTALLATION & INTEGRATION •
OPERATING INSTRUCTIONS
• MAINTENANCE • SERVICE
USER GUIDE
u-line.com
Airflow and Product Loading 1
Interior Shelves
REMOVING AND INSTALLING INTERIOR
SHELVES
For models equipped with glass shelves having
recessed shelf supports, remove the shelves as
follows:
1.
Pull shelf out about 6" (1), until back of shelf
clears the “hump” on the right
-hand side.
2.
Tilt up right-hand edge of shelf (2).
3.
Remove shelf from unit by pulling out (3).
Insert the shelves as follows:
1.
To move to a different position in the unit, insert
shelf at an angle, approximately 15-20°, over the
rib in the side of the unit where you want to place
the shelf. Place the shelf into the unit at an angle
to clear the door.
2.
Continue to slide the shelf into the unit at an angle
until it clears the door.
Lower the shelf and push it in completely. Ensure
the raised edge strip is toward the rear of the unit.
NOTICE
Make sure the shelves are inserted fully into the
unit.
The edge strip toward the rear prevents cans
and bottles from freezing against the cold
evaporator.
2
3
1
