Tytan DS 512, Installation Manual

Page: 12 / 21

12
tytan
8. BASIC SMS COMMANDS
The DS512 can be controlled by SMS commands sent from any mobile phone. The
commands are described in details in User Manual. The commands begin with 5-digit VSS
PIN code (
Important! Not to be confused with SIM card PIN!). The VSS PIN code prevents
DS512 from unauthorised access. Default VSS PIN code is 12345. In this document, 2 basic
commands, applicable for device testing will be shown.
DS512 Status
Basic method of testing the DS512 SMS commands functionality is to send the command
that require the DS512 to respond with device status.
For the new device:
The device will respond with the status SMS, thus confirming the correct DS512 mobile
number and correct VSS PIN code. The DS512 sends back the SMS with information on
vehicle and security system status. The information about status is sent in a full or simplified
version, depending on settings configured in the device during installation.
The full version of system status is:
The simplified version of system status is:
The optional information in vehicle status SMS are:
Programming VSS PIN code, number of mobiles phones to notify and mobile phone
numbers.
The command changes VSS PIN code, sets number of mobiles phones, which receive SMS
with information when the alarm is triggered in the vehicle (0,1,2 or 3 mobile phones) and
sets the phone numbers for these mobile phones.
{VSS PIN} status
12345 status
device status: {OK / ALARM was triggered!}
system: {disarmed / armed / armed w/o sensors / armed w/o
trunk and sensors / ALARM in progress! / disarmed
(rearming) / valet mode / ANTI-HIJACK in progress! /
ANTI-HIJACK vehicle stopped}
device status: {OK / ALARM was triggered!}
system: ALARM in progress! / ready / valet mode / ANTI-HIJACK
in progress! / ANTI-HIJACK vehicle stopped}
door/trunk/bonnet: {closed / opened}
ignition: {on / off}
{current VSS PIN} setgsm {new VSS PIN} {new VSS PIN} {number of mobile
phones} {first phone number} {second phone number} {third phone number}