TYROLIT Hydrostress TBE400, Operating Instructions Manual

Page: 6 / 31

6
HEALTH WARNINGS
Some dust are created by power sanding, sawing, grinding, drilling, and cause other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
•
Lead from lead based paints.
•
Crystalline silica from bricks and cement and other masonry products.
•
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
UNPACKING, ASSEMBLY & SET-UP
Open the container, carefully lift the saw frame handles and place it on a flat, level
working area. Be certain that you have the following items before you discard the
container:
•
Saw
•
45° / 90° rip guide
•
Universal wrench
•
Owner’s manual
DIAMOND BLADE INSTALLATION
1. Move the blade shaft cover upwards.
To remove the blade lock nut, open
the shaft space.
2. Place the blade onto the blade shaft.
Make sure that the directional arrow is
pointing in the direction of the shaft
rotation
3. Lock the blade lock nut with the outer
flange. Use the multiple wrench
provided to fasten the blade tightly