TYROLIT Hydrostress TBE400, Operating Instructions Manual

Page: 11 / 31

11
WATER PUMP INSTALLATION
1. Remove the water pump from the box and check that it is not damaged.
2. Place the pump into the middle of the water tray along its side so that the water
outlet is positioned horizontally. Connect the water hose from the blade guard to the
pump and plug the power cord into the 3-prong receptacle.
3. Fill the water tray so that the water intake is fully immersed.
4. Be sure to support the pump during installation to prevent pump failure or damage.
Disconnect the pump before attempting to handle the pump.
Never operate pump without water in the tray