Installation and commissioning
8
.02
8
.02.01
Mounting the
flange motor
Mounting the flange motor to the bearing plate
1
7
2
3
8
6
4
Fig. 8 - 04
3
5
● Attach bearing plate
1
to motor
2
with screws
3
as shown in Fig.
8
-
04.
● Remove the wedge from motor shaft
4.
● Attach angle bracket
5
with screws
6.
● Fit toothed belt wheel
7
to the motor shaft
4,
so that the point of the screw is located in
the groove of the motor shaft.
● Screw threaded stud
8
into the bearing plate
1.
8
.02.02
Mounting the flange motor to the machine
● Attach bearing plate
1
of motor
2
to the
machine case with screws
3
(only tighten
screws
3
slightly).
3
2
3
1
Fig. 8 - 05
24
