Only use drawbar to tow and keep the 3 point linkage in raised position when toeing
with the drawbar.
Position can create unbalance causing the Tractor to roll-over & Result the death or
serious injury.
Danger
►
►
►
►
ADJUSTMENT OF THE SWING DRAWBAR
■
The device can be supplied:
– With a bracket designed only to fit the Drawbar.
The following adjustments can be made to the bar:
– Prevention of lateral swing by inserting the bracket
①
①
①
①
.
►
►
►
►
ATTACHING IMPLEMENT
■
To attach an implement:
55
Caution
Do not attach a PTO shaft with the engine running and ensure all safety shields
are in place.
■
To attach an implement:
1. If the PTO is to be used, remove the safety cover from
the PTO shaft.
2. Adjust the yoke rods on the lower links as necessary
for the implement to be used.
3. Attach the left lower link then attach the right lower
link using the adjusting handle on the leveling box if required.
4. Attach the top link.
5. If using the PTO, attach the implement PTO shaft to the machine,
making sure that it is locked in place.
6. Adjust the check chains as necessary for the implement to be used and tighten the lock nuts.
Summary of Contents for T1003
