Under Counter Extreme
20
21
Dispenser Installation
Place the assembled dispenser into the
drilled hole.
Insert one of the provided rubber O-Rings
in the assembled dispenser.
Tighten the fixing nut underneath the sink.
(do not over-tighten)
Insert the second rubber O-ring in the
assembled dispenser located underneath
the sink.
32mm
Drain Pipe
Water Outlet Pipe
Dispenser Installation
First, unscrew the large nut from the
bottom of the dispenser.
1
Press the outflow pipes into the holes of
the dispenser.
※
upper hole: water outlet pipe
-152mm (6inches)
※
lower hole : drain pipe
-102mm (4inches)
Connect each hose from the dispenser to
a union connector. Connect each hose
from the ionizer to the union connector.
When you connect the hoses, please
match the hoses by color:
i.e., orange–orange, white–white
If your tower has hoses that are red and
clear instead of orange and white, then
connect the red hose to the orange hose
and the clear hose to the white hose.
from Ionizer
from Dispenser
Use a 32mm(1 / inch) drill bit to drill
a hole.
1 4
Dispenser Installation
①
⑤
⑥
⑧
⑦
②
③
④
※
