Tyco ADT1200E, User Manual

Page: 18 / 94

User’s Manual
8
HDD LED
The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
Alarm Out LED
The Alarm Out LED is lit when alarm output or internal buzzer is activated.
NETWORK LED
The NETWORK LED is lit when the unit is connected to a network via Ethernet.
Clip Copy LED
The Clip Copy LED is lit when the DVR is clip-copying.
POWER LED
The POWER LED is lit when the unit is On.
PANIC Button
Pressing the
PANIC
button starts panic recoding of all camera channels, and displays on the screen.
Pressing the button again will stop panic recording.
ALARM Button
The
ALARM
button has two functions. First, it will reset the DVR’s outputs including the internal buzzer
during an alarm. Second, it will display the event log when you are in the live monitoring mode unless
there is an active alarm. This operation can be user password protected.
CLIP COPY Button
Pressing the
CLIP COPY
button allows you to copy video clips.
ZOOM/PTZ Button
Pressing the
ZOOM/PTZ
button zooms in the current image in double on the screen. You can use the
arrow buttons to move the rectangle to another area. Pressing the (Play/Pause) button zooms in the
image in rectangle.
Pressing and holding the button for two seconds or longer enters the PTZ (Pan/Tilt/Zoom) mode and the
PTZ icon flickers. Pressing the button again exits the PTZ mode. Pressing the arrow buttons or
MENU/CAMEO
button allows you to control properly configured cameras.