2.0 Introduction
- 12 -
l
Seiko DPU-414
TCP/IP Printer
For UL Listed applications, the UL Listed SG-Systems Console Software can be used with the SG-System 5.
NOTE: For ULC Listed applications, the Console Printer application is considered supplemental and is only allowed to be used in con-
junction with a compatible ULC Listed printer.
SG-Systems Console Software System Requirements
Compatible operating systems:
l
Microsoft Windows 2008 Server (32 and 64 bit)
l
Microsoft Windows 7 (32 and 64 bit)
l
Microsoft Windows 8 (32 and 64 bit)
l
Microsoft Windows 8.1 (32 and 64 bit)
NOTE: Requires .NET Framework 3.51.
Hardware requirements:
l
Intel Atom CPM @ 1.6GHz and 1 GB of RAM
NOTE: Do NOT use printer cables that have only 1 common ground wire.
2.3.4 UL Manual Mode
For UL Manual mode, each event will activate the internal buzzer to be acknowledged manually. Each event will also be sent automatically to the con-
nected printer.
NOTE: A user must be logged in before acknowledging signals. A logged in user will remain logged in until a new user enters a valid user
name and password or if the SG-CPM5 resets/reboots.
2.3.5 SG-System 5 Power Limited Circuit Separation
FIGURE 2-4: SG-System 5 Power Limited Circuit Separation from Non-Power Limited Circuit Diagram
1
2
3
4
5
7
8
9
6
10
1.
Secondary Line Card Ethernet Connections
6.
Primary Line Card Ethernet Connections
2.
Secondary SG-CPM5 Ethernet Connection
7.
Primary SG-CPM5 Ethernet Connection
3.
Secondary SG-CPM5 Automation and Printer Port
8.
Primary SG-CPM5 Automation and Printer Port
S
G
-S
ys
te
m
5
O
pe
ra
ti
ng
M
anua
l
Summary of Contents for SG-System 5
Page 69: ...6 0 Options 69 FIGURE 6 2 Flow Diagram for Fallback Mode 1 SG System 5 Operating Manual ...
Page 70: ...6 0 Options 70 FIGURE 6 3 Flow Diagram for All Mode 2 SG System 5 Operating Manual ...
Page 71: ...6 0 Options 71 FIGURE 6 4 Flow Diagram for IP Fallback Mode 3 SG System 5 Operating Manual ...
