Tyco Electronics p5400 series Operator'S Manual Download Page 18

Page: 18 / 135

MM-013994-001

Do not leave any M/A-COM rechargeable batteries in a charger for more than a few days.

4.4

CHANGING THE BATTERY PACK

4.4.1

Removing the Battery Pack

Make sure the power to the radio is turned OFF.

CAUTION

Although the P7300 has been designed to tolerate changing the battery pack without
turning power off, M/A-COM, Inc. recommends turning the radio off before changing
battery packs to ensure safety and best operation.

Press or pull both latches on either side of the battery pack

toward the bottom of the radio

simultaneously.

Pull the battery

away from the radio.

Remove the battery pack from the radio.

Figure 4-1: Removing the Battery Pack

Summary of Contents for p5400 series








































































































































Search results

Summary of Contents for p5400 series

Reviews:

Related manuals for p5400 series

Brands by name

Popular brands

Tyco Electronics p5400 series, Operator'S Manual

Search results

Summary of Contents for p5400 series

Reviews:

Related manuals for p5400 series

Brands by name

Popular brands