MM-013994-001
71
3.
Adjust the POWER ON-OFF/VOLUME knob to the desired volume level.
4.
Select the desired system, group/channel. The display indicates the current system and group/channel
names.
5.
The radio is now ready to transmit and receive calls.
9.7 SYSTEM
SELECTION
METHOD 1:
From the control knob: If system selection is programmed to the Voice Group
Selection control knob, select a system by turning the knob to the desired number
position (1-16). The display registers the new system name on line one. The
button
can be programmed to provide access to a “2
nd
bank” of 16 system number positions
(17-32).
METHOD 2:
From the keypad: If system selection is programmed as the primary function of
and
,
select a system by pressing
or
to scroll through the system list. The
display registers the new system name on line one
.
METHOD 3:
(P7370 model radios only)
Direct Access: Press
to enter the system select mode.
Press the numeric key, which is mapped to the desired system. Press
.
The radio
will move to the selected system.
If system selection is programmed to the Voice Group Selection control knob, direct
access to systems will not be available. Pressing
or
will scroll through different
sets of 16 systems each (banks) if more than 16 systems are programmed into the radio.
The systems within each bank are then selectable via the Voice Group Selection control
knob as described previously in METHOD 1.
Example:
System: 1 = North
Group: 1 = Group 1
2 = South
2 = Group 2
3 = East
3 = Group 3
4 = West
4 = Group 4
1.
Press
. (South is the currently selected system.)
2.
Press
. (Press 4 to select the “West” system.)
3.
Press
. (West is the newly selected system.)
9.8 GROUP/CHANNEL
SELECTION
Several methods can be used to select a new group/channel.
METHOD 1:
From the Control knob: If group selection is programmed to the Voice Group Selection
control knob, select a group by turning the Voice Group Selection control knob to the
desired group number position. The display registers the new group name on line two.
If the knob is moved to a position greater than the number of programmed group, the
highest programmed group will remain selected. The button can be programmed to
provide access to a “2
nd
bank” of 16 group number positions (17-32)
Summary of Contents for p5400 series
