MM-014713-001
6
2 GENERAL
DESCRIPTION
The M/A-COM CS-7000 Control Stations shown in Figure 2-1 and Figure 2-2 are state-of-the-art Control
Stations. The slimline design of the CS-7000 Control Station provides a convenient method to equip
offices, shops and other remote locations with radio communications.
At the heart of the CS-7000 Control Stations are the M5300 and M7300 transceiver. The M5300
transceiver is a single band transceiver capable of EDACS
®
, Conventional, and P25 modes of operation.
The M7300 transceiver is a dual band 700/800 MHz transceiver capable of EDACS, Conventional, P25,
and OpenSky
®
modes of operation. Both transceivers may be equipped with the Scan (Figure 2-1) or
System (Figure 2-2) model CH721 Control Head.
The CS-7000 Control Station may also be equipped with a remote interface board allowing remotely
located desktop station controllers to share radio communications with the local operation of the Desktop
Station.
The Desktop Station is available in the following three models:
•
Desktop Station configuration with only local controls.
•
Desktop Station configuration with local and remote control capability.
•
Remote mount configuration with remote control capability.
Local Control Desktop Station model CT-013892-001 shown in Figure 2-1 is designed to provide local
control of an M5300 or M7300 transceiver (shown with a Scan Control Head) in a desktop control station
configuration.
Local/Remote Control Desktop Station model CT-013892-002 shown in Figure 2-2 is includes a built-in
remote controller board and front panel controls. This model is designed to provide local and remote
control operation.
Remote station model CT-013892-003 (not shown) features are similar to the Local/Remote Control
Desktop Station, however without a control unit or speaker, and with a blank faceplate and power LED.
Figure 2-1: CT-013892-001 Local Control Station with Scan Head (Front View)
Figure 2-2: CT-013892-002 Local/Remote Control Station with System Head (Front View)
