MM-014713-001
9
3.2.5 VU
Meter
Control Station is equipped for remote control operation also includes a VU Meter. The VU Meter
displays, in bar graph format, line audio levels to and from remote controllers.
Figure 3-2: Front Panel Features – Remote Control Station
3.3 REMOTE
MOUNT
STATION
The CS-7000 Remote Mount Station (not shown) is designed for applications where access to local user
controls is not required. The Remote Mount Station is housed in a 2-RU high rack mountable enclosure
and equipped only with a front panel power LED. Rear panel features are as described in Section 3.4.
This model is fully remote controlled and does not include any front panel user controls, a control unit,
rubber feet, or a front panel speaker.
3.4 REAR
PANEL
FEATURES
All versions of the CS-7000 Control Station share similar rear panel features. The following sub-sections
provide a brief description of the available rear panel features.
3.4.1 AC Power Switch/Cord/Fuse Assembly
The AC Power Switch/Cord/Fuse assembly is located on the left side of the rear panel when facing the
rear panel. As indicated it serves as the main Control Station ON/OFF switch, AC cord receptacle, and
houses the fuses for the main AC line input. This switch controls AC power to the 120/240, 50/60 Hz
internal AC power supply.
3.4.1.1 AC
Power
Switch
The main AC Power Switch for the Control Station is located on the left side of the rear panel (when
facing the rear panel), and is part of the AC Power Switch/Cord/Fuse assembly.
3.4.1.2 AC
Power
Cord Receptacle
The AC Power Cord receptacle for the Control Station is located on the left side of the rear panel (when
facing the rear panel) and is part of the AC Power Switch/Cord/Fuse assembly. The receptacle is an
industry standard IEC-302 type 3-pin power connector.
