background image

MM-014713-001 

 

17 

7 WARRANTY 

 

A.  M/A-COM, Inc. (hereinafter "Seller") warrants to the original purchaser for use (hereinafter "Buyer") that Equipment 

manufactured by or for the Seller shall be free from defects in material and workmanship, and shall conform to its 
published specifications. With respect to all non-M/A-COM Equipment, Seller gives no warranty, and only the warranty, if 
any, given by the manufacturer shall apply.  Rechargeable batteries are excluded from this warranty but are warranted 
under a separate Rechargeable Battery Warranty (ECR-7048). 

B.  Seller’s obligations set forth in Paragraph C below shall apply only to failures to meet the above warranties occurring 

within the following periods of time from date of sale to the Buyer and are conditioned on Buyer’s giving written notice to 
Seller within thirty (30) days of such occurrence: 

1.  for fuses and non-rechargeable batteries, operable on arrival only. 
2.  for parts and accessories (except as noted in B.1) sold by Seller’s Service Parts Operation, ninety (90) days. 
3.  for P7200, P7100IP, P5400, P5300, P5200, P5100, P3300, PANTHER

 405P and 605P, M7300, M7200 (including 

V-TAC), M7100 IP, M5300 and M3300 radios, two (2) years. 

4.  for all other equipment of Seller’s manufacture, one (1) year. 

C.  If any Equipment fails to meet the foregoing warranties, Seller shall correct the failure at its option (i) by repairing any 

defective or damaged part or parts thereof, (ii) by making available at Seller’s factory any necessary repaired or 
replacement parts, or (iii) by replacing the failed Equipment with equivalent new or refurbished Equipment. Any repaired 
or replacement part furnished hereunder shall be warranted for the remainder of the warranty period of the Equipment in 
which it is installed. Where such failure cannot be corrected by Seller’s reasonable efforts, the parties will negotiate an 
equitable adjustment in price. Labor to perform warranty service will be provided at no charge during the warranty period 
only for the Equipment covered under Paragraph B.3 and B.4. To be eligible for no-charge labor, service must be 
performed at a M/A-COM factory, by an Authorized Service Center (ASC) or other Servicer approved for these purposes 
either at its place of business during normal business hours, for mobile or personal equipment, or at the Buyer’s location, 
for fixed location equipment. Service on fixed location equipment more than thirty (30) miles from the Service Center or 
other approved Servicer’s place of business will include a charge for transportation. 

D.  Seller’s obligations under Paragraph C shall not apply to any Equipment, or part thereof, which (i) has been modified or 

otherwise altered other than pursuant to Seller’s written instructions or written approval or, (ii) is normally consumed in 
operation or, (iii) has a normal life inherently shorter than the warranty periods specified in Paragraph B, or (iv) is not 
properly stored, installed, used, maintained or repaired, or, (v) has been subjected to any other kind of misuse or 
detrimental exposure, or has been involved in an accident. 

E.  The preceding paragraphs set forth the exclusive remedies for claims based upon defects in or nonconformity of the 

Equipment, whether the claim is in contract, warranty, tort (including negligence), strict liability or otherwise, and however 
instituted. Upon the expiration of the warranty period, all such liability shall terminate. The foregoing warranties are 
exclusive and in lieu of all other warranties, whether oral, written, expressed, implied or statutory. NO IMPLIED OR 
STATUTORY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY. IN 
NO EVENT SHALL THE SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT OR 
EXEMPLARY DAMAGES. 

 

This warranty applies only within the United States. 

 

M/A-COM, Inc. 

M/A-COM, Inc. 

1011 Pawtucket Blvd. 

221 Jefferson Ridge Parkway 

Lowell, MA  01853 

Lynchburg, VA 24501 

1-877-OPENSKY (673-6759) 

1-800-528-7711 

 
 
 
 
 
 

Ref: ECR-7047E 

Summary of Contents for CS-7000



















Reviews: