Tyco Electronics CS-7000, Operator'S Manual

Page: 16 / 18

MM-014713-001
16
6 INTERCOM AND REMOTE SWITCH SUMMARY
Table 6-1: Summary of Remote and Intercom Switch Positions
SWITCH
POSITIONS
PTT BUTTON
1
STATUS
TRANSMIT
PRIORITY
2
COMMENTS
Receive Mode
(No PTTs Pressed).
N/A
The Control Station’s receiver audio is
heard at the Control Station’s speaker, and
Remote Controller’s speaker.
PTT on Control Station
Microphone Pressed.
1
Audio from Control Station’s microphone is
heard at the Remote Controller’s speaker.
Intercom Mode Selected
on the Remote Controller
and PTT Pressed.
2
Audio from Remote Controller’s
microphone is heard at the Control
Station’s speaker.
INTERCOM AND
REMOTE ENABLED
Transmit Channel Selected
on the Remote Controller
and PTT Pressed.
2
Audio from Remote Controller’s
microphone is heard at the Control
Station’s speaker, and transmitted over-
the-air.
Receive Mode
(No PTTs Pressed).
N/A
The Control Station’s receiver audio is
heard at the Control Station’s speaker.
PTT on Control Station
Microphone Pressed.
1
Audio from Control Station’s microphone is
heard at the Remote Controller’s speaker.
INTERCOM-ONLY
(REMOTE DISABLED)
Remote Controller PTT
Pressed.
2
Microphone audio from Remote Controller
is heard at the Control Station’s speaker.
Receive Mode
(No PTTs Pressed).
N/A
The Control Station’s receiver audio is
heard at its speaker, and Remote
Controller’s speakers.
1
PTT on Control Station
Microphone Pressed.
1
Audio from Control Station’s microphone is
heard at Remote Controller’s speaker, and
transmitted over-the-air.
Intercom Mode Selected
on the Remote Controller
and PTT Pressed.
2
Microphone audio from Remote Controller
is heard at the Control Station’s speaker.
REMOTE ENABLED
Transmit Channel Selected
on the Remote Controller
and PTT Pressed.
2
Audio from Remote Controller’s
microphone is heard at the Control
Station’s speaker, and transmitted over-
the-air.
Receive Mode
(No PTTs Pressed).
N/A
The Control Station’s receiver audio is
heard at the Control Station’s speaker.
REMOTE DISABLED
PTT on Control Station
Microphone Pressed.
1
Audio from the Control Station’s
microphone is transmitted over-the-air.
1. Regarding all PTT actions, it is possible for the Control Station to be programmed to hinder all PTT actions when its
receiver is unmuted (receiving an over-the-air call). PTT actions are restored once the receiver is muted.
2. PTT actions from the Control Station’s microphone will always take precedence over PTT requests form Remote
Controllers.