TYAN S5211 Manual Download Page 57

Page: 57 / 80

http://www.tyan.com

3.4.6 IPMI

This section allows you to configure the IPMI settings.

IPMI Specification Version / BMC Firmware Version

It displays the version of the IPMI Specification and BMC Firmware. (Read only)

System Event Logging

Select [Enabled] to allow logging of system events.
Options:

Enabled

/ Disabled

Clear System Event Log

When set to [Enabled], system event log will be cleared.
Options:

Disabled

/ Enabled

Existing Event Log number / Remaining Event Log number

It displays the number of existing event logs and remaining event logs. (Read only)

SYS Firmware Progress

It records the continual development of BIOS POST.
Options:

Disabled /

Enabled

BIOS POST Errors

Enabled -> BIOS will halt & display error message if there is any POST error .
Disabled -> BIOS will not halt if there is any POST error.
Options: Disabled /

Enabled

Summary of Contents for S5211

















































































Search results

Summary of Contents for S5211

Reviews:

Related manuals for S5211

Brands by name

Popular brands

TYAN S5211, Manual

Search results

Summary of Contents for S5211

Reviews:

Related manuals for S5211

Brands by name

Popular brands