TYAN S5211 Manual Download

Page: 5 / 80

http://www.tyan.com

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions available. The
Toledo i3210W/i3200R (S5211/S5211-1U) is a flexible Intel

platform for multiple

applications, based on the Intel

3210 (S5211) or 3200 (S5211-1U) MCH and

ICH9R chipsets.

Designed to support the family of Intel

Socket 775 processors and 8GB of DDR2

800/667 memory, the S5211/S5211-1U has integrated Dual Ethernet LAN’s, a built-
in 32MB XGI Z9S video controller and six SATA-II ports. This motherboard
represents the best choice for a server platform product.

Remember to visit TYAN

Website at

http://www.tyan.com

. There you can find

information on all of TYAN

products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processor

•

Single LGA775 socket

•

Support Intel

processors

- Quad-Core Intel

Xeon

processor

3300 and 3200 series
- Dual-Core Intel

Xeon

processor

3100 and 3000 series
- Intel

Core

2 Extreme

- Intel

Core

2 Quad processor

Q6000 sequence

- Intel

Core

2 Duo processor

E6000 sequence

•

1333/1066/800 FSB supported

Expansion Slots

S5211

•

Two (2) PCI-E x 16 slots (w/x8 bus)

NOTE:

If a PCI-E x16 VGA adapter is

inserted into PCI-E slots, the VGA
card will only work at PCI-E x1 speed;
this is a chipset limitation.

•

Two (2) PCI-X 1.0 64/133 slots

•

Two (2) 32/33 PCI 2.3 slots

S5211-1U

•

One (1) PCI-E slot (w/x8 bus)

NOTE:

If a PCI-E x16 VGA adapter is

inserted into this slot, the VGA card
will only work at PCI-E x1 speed; this
is a chipset limitation.

Integrated LAN Controllers

•

Two (2) Intel i82573 GbE NICs

(1*1*82573L)

- operating at independent PCI-E x1
interface

Integrated I/O

•

One IDE connector

•

Six SATA (3Gb/s) ports

•

Six USB 2.0 ports (2 at rear, 4 via

cable)

•

Two COM ports (1 at rear, 1 via cable)

•

TYAN

2x9 front-panel pin header

•

TYAN

2x6 front-panel pin header for

LAN LED and ID LED/Switch
(reserved for OEM only)

•

2x7 pin Fan header (reserved for OEM

only)

•

2x3 pin LCM header (reserved for

OEM only)

•

200pin vertical SO-DIMM for optional

TYAN

IPMI SMDC

Integrated USB IDE
(CY7C68300C)

•

Single Ultra ATA channels for dual

ATA devices

Summary of Contents for S5211

















































































Search results

Summary of Contents for S5211

Reviews:

Related manuals for S5211

Brands by name

Popular brands

TYAN S5211, Manual

Search results

Summary of Contents for S5211

Reviews:

Related manuals for S5211

Brands by name

Popular brands