TYAN S5211 Manual Download

Page: 55 / 80

http://www.tyan.com

3.4.5 Hardware Monitor

This section allows you to fine tune the Hardware Monitor configuration.

Fan1/Fan2/Fan3/Fan4/Fan5/Fan6/CPU Below Tmax/Ambient 1 (2, 3) Temp.

Items can not be modified in user mode. Read only.

NOTE:

CPU Below Tmax is read by Platform Environment Control Interface (PECI).

Tmax= Thermal control circuit (TCC) Activation Temperature

FAN Fail LED Indicator

When it is set to [Enabled], the LED will be on when the FAN failed.
Options:

Disabled /

Enabled

Auto Fan Control:

This feature is used to set function of Auto Mode Fan Control.
Options: Enabled /

Disabled

PWM Duty Cycle

This item allows you to set minimum PWM Duty Cycle.
Options: 0% / 30% /

40%

/ 50%

Note: This item is usually hidden and will appear when

Auto Fan Control

is set to

[Enabled].

Summary of Contents for S5211

















































































Search results

Summary of Contents for S5211

Reviews:

Related manuals for S5211

Brands by name

Popular brands

TYAN S5211, Manual

Search results

Summary of Contents for S5211

Reviews:

Related manuals for S5211

Brands by name

Popular brands