Thunder 2500 S1867
23
Make sure the lowered lip of the overhead clip is oriented away from the CPU
fan
(see Figure 2-11 below).
Removing CPU
Removal of the CPU is basically the reverse order of the installation steps. First remove
the overhead clip. You need to push BOTH side tabs (see Figure 2-10 above) inwards in
the order to unlock it from the side braces. After the overhead clip is removed, remove
the CPU by gently bending the sides of the retention brace away from the CPU and slowly
pulling the CPU upwards. This may require careful firm tugs to pull the CPU out of its
slot.
INST
A
LL
Tab
Tab
Lowered lip
Figure 2-10
Figure 2-11
