manualshive.com logo in svg

TYAN S1571, Manual

Share
Download
TYAN S1571 Manual Download Page 51

Notice for the USA
Compliance Information Statement

(Declaration of Comformity Procedure) DoC

FCC Part 15: This Device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that
    may cause undesired operation.  If this equipment does cause harmful
    interference to radio or television reception, which can be determined by
    turning the equipment off and on, the user is encouraged to try one or more
    of the following measures:

w

 Reorient or relocate the receiving antenna.

w

 Increase the separation between the equipment and receiver.

w

 Plug the equipment into an outlet on a circuit different from that of the

    receiver.

w

 Consult the dealer or an experienced radio/TV technician for help.

Notice for Canada
   

This apparatus complies with the Class "B" limits for radio interference as

    specified in the Canadian Department of Communications Radio Interference
    Regulations.

    Cet appareil est conforme aux normes de CLASSE "B" d' interference radio
    tel que spec' cifie' par le Ministe're Canadien des Communications dans les
    re'glements d'interfe'rence radio.

Notice for Europe (CE Mark)

    This product is in conformity to the Council Directive 89/336/EEC, 92/31/

    EEC (EMC).

52

Summary of Contents for S1571





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands