manualshive.com logo in svg

TYAN S1571, Manual

Share
Download
TYAN S1571 Manual Download Page 34

35

S1571 D1181-001  http://www.tyan.com

BIOS Configuration

w

Standby Mode

   Defines the continous idle time before the system enters Standby mode.
   Video and fixed disk drive shut down; all other devices operate normally.

w

Suspend Mode

   Defines the continuous idle time before the system enters Suspend mode.
   All devices except the CPU shut down.

w

HDD Power Down

   The hard disk drive powers down after the chosen period of drive
   inactivity, while all other devices remain active.

w

Throttle Duty Cycle

   While the system is in Doze mode, the CPU clock runs only part of the
   time. This function allows you to select the percentage of time that the
   clock will run.

w

ZZ Active in Suspend

   When Enabled, the ZZ signal is active during Suspend mode.

w

VGA Active Monitor

   When Enabled, any video activity restarts the global timer for Standby
   mode.

w

IRQ8 Clock Event

   You can turn on or off monitoring of IRQ8 so it does not awaken
   the system from Suspend mode.  If you disable this function, the
   IRQ8 will not be monitored, and will not awaken the system from
   Suspend mode.

w

Reload Global Timer Events

   Defines the activities that can cause the PM timers to reload.

Summary of Contents for S1571





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands