25
S1571 D1181-001 http://www.tyan.com
Press <PgUp> or <PgDn> to select a numbered hard disk type, or type a
number and press <Enter>. Note that the specifications of your drive must
match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk type is not
listed, you can select User to define your own drive manually.
If you choose the User type, you will be asked to fill in the categories
shown in the chart below. Enter the parameters and press <Enter>. (Your
hard disk information should be provided in the documentation from the
hard disk vendor or the system manufacturer.)
If a hard disk has not been installed or you have a CD-ROM/Tape drive
connected to an IDE channel, select NONE and press <Enter>.
w
Drive A type/Drive B type
This category identifies the types of floppy disk drives that have been
installed in your computer as the A and/or B drives. The possible floppy
drive types are as follows:
w
Video
This category detects the type of graphics adapter used for the primary
display system. The BIOS usually detects the correct video type automati-
cally.
BIOS Configuration
None
No floppy drive installed.
360KB, 5.25 in.
5.25 inch PC-type standard drive; 360KB capacity.
1.2MB, 5.25 in.
5.25 inch AT-type high-density drive; 1.2MB capacity.
720KB, 3.5 in.
3.5 inch double-sided drive; 720KB capacity.
1.44MB, 3.5 in.
3.5 inch double-sided drive; 1.44MB capacity.
2.88MB, 3.5 in.
3.5 inch double-sided drive; 2.88MB capacity.
CYLS
number of cylinders
HEADS
number of heads
PRECOMP
write precomp cyl
LANDZONE
landing zone
SECTORS
number of sectors
MODE
auto, normal, large, or LBA