Last
update:
2020/06/26
10:48
torpedo_cab_mplus:torpedo_c.a.b._mplus_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_cab_mplus:torpedo_c.a.b._mplus_user_s_manual
https://wiki.two-notes.com/
Printed on 2020/06/26 14:07
4.3.3 Level
This parameter lets you set the level of the preset. It is
independent of the output level (set in the PERFORM
environment), which is the same for all presets and
acts as a master level.
4.3.4 Save
This section allows you to save a preset.
First, you rename the preset by scrolling the
characters.
When the name is done, press Enter (the right encoder
knob) to select the memory slot where you will save
the preset. Once you have chosen the slot, press enter.
The unit will display « Saving, please wait… » and when
saved, you will be at the memory location you saved
for this preset.
4.3.5 Tuner
Access the tuner by clicking on the fork button at the
bottom of the Room image.
The tuner is fully chromatic. The note detected is
shown on the left hand side. The base tuning point is
set with the right encoder VALUE anywhere between
410hz and 490hz, by default it is at 440hz. Pressing
ENTER on the right encoder will mute the pedal.
4.3.6 Global
Here you will have access to parameters that concerns
the aux input, the display, the memory, etc.
4.3.6.1 Aux Level
You set the level of the AUX input located on the left side of the pedal. You can mute
the signal by pressing ENTER. The signal coming from the AUX input does not go
through the C.A.B. M+ processing (Preamp, Power Amp, Miking…). Only its level is
adjusted before mixing it at the output of the unit. The AUX input is downmixed from
stereo to mono.
