![Twister Skylift 2.4 Assembly & Flight Training Manual Download Page 9](http://html1.mh-extra.com/html/twister/skylift-2-4/skylift-2-4_assembly-and-flight-training-manual_1184689009.webp)
9
J Perkins Distribution Ltd
Twister skyLift
R/C
3. Repeat the previous two steps to attach the remaining 6 blades to the helicopter ensuring the
correct placement of upper and lower blade types.
4. The flybars are snapped into position into the holes in the upper centre hub and do not require any
screws.
Flybar
Centre hub
Tip: Tilt the flybar at an angle when fitting. See below:
1. Tilt flybar
2. Press into top of hub
3. Snap into holes
5. Snap the plastic ball link onto the ball arm:
Snap link into
place over ball
6. Fit the other flybar in the same way.