![Twister Skylift 2.4 Assembly & Flight Training Manual Download Page 7](http://html1.mh-extra.com/html/twister/skylift-2-4/skylift-2-4_assembly-and-flight-training-manual_1184689007.webp)
7
J Perkins Distribution Ltd
Twister skyLift
R/C
1. Connect the charger to your power source. The 'POWER' LED will flash red.
2. Plug the 3-pin connector on your Li-po battery into the socket in the right side of the charger.
The green LED will light and the red LED will glow solid red.
3. When the battery is fully charged the green LED goes out. Disconnect the battery from the charger.
4. Disconnect the power source from the charger. Your Li-po battery is ready for use.
FITTING THE FLIGHT BATTERY
1. Slide the charged battery pack into the lipo cradle as indicated.
Do not connect the battery yet!
Ensure the battery is slid all the way home and retained with a small piece of velcro fastening (attached to
the battery and lower battery holder).