12
http://www.jperkinsdistribution.co.uk
R/C
Twister skyLift
transmitter - throttle riGht (mode 1)
A hovering helicopter is controlled about 4 axes; yaw, pitch, roll and height. Your transmitter has 2 dual-axis
precision stick units with two controls on each stick.
In a throttle right (mode 1) transmitter
The right stick controls height (climb or descent) and cyclic aileron control to roll the helicopter left
or right.
The left stick operates the tail rotor controls yaw (left or right) and cyclic elevators controls which
are used to pitch the helicopter nose up/nose down.
See page 22 for a complete description of R/C model helicopter controls.
Throttle/Roll
control
stick
Throttle trim
Fore and aft cyclic trim
Yaw trim
Roll cyclic trim
Fore and
aft/Yaw
stick
Low throttle
position
High throttle
position
1. Move the throttle (right stick) and throttle trim of your transmitter to the lowest (low throttle)
position as shown above.
2. Centre the trim levers of the 3 other transmitter functions.
3. Switch on the transmitter.
