11
J Perkins Distribution Ltd
Twister skyLift
R/C
transmitter - throttle left (mode 2)
A hovering helicopter is controlled about 4 axes; yaw, pitch, roll and height. Your transmitter has 2 dual-axis
precision stick units with two controls on each stick.
In a throttle left (mode 2) transmitter
The left stick controls height (climb or descent) and tail rotor controls yaw (left or right).
The right stick operates the cyclic steering controls which are used to pitch the helicopter nose
up/nose down—move forwards or backwards and to roll the helicopter left or right—crab to left or
to right.
See page 22 for a complete description of R/C model helicopter controls.
Throttle trim
Fore and aft cyclic trim
Yaw trim
Roll cyclic trim
Throttle/Yaw
stick
Cyclic control
stick
Low throttle
position
High throttle
position
1. Move the throttle (left stick) and throttle trim of your transmitter to the lowest (low throttle) position
as shown above.
2. Centre the trim levers of the 3 other transmitter functions.
3. Switch on the transmitter.
