Rev: 2015.04.22.v03a
page 15
Install into the slot, wipe away any
extra glue and repeat for the other side
Once the glue of the partially
assembled airframe has set up enough
to handle, install the rudder servo.
NOTE - DO NOT GLUE THE SERVO AT
THIS TIME
Make sure that the servo sits nice a
ush in the provided hole
Check the areas around the servos,
they should not interfere with the
fuselage sections meeting up nice a
ush
Test t the upper fuselage section and
make sure that all tabs and slots are
able to fully engage
For ease of wiring later make sure all
the servo wires are on the same side of
the fuselage
