E-6
IMPORTANT SAFETY FEATURES
1.The safety pilot light marked POWER is illuminated when the control is turned to
FAN, HIGH or LOW.
2.This heater is equipped with an AUTOMATIC OVERHEAT SAFETY DEVICE that will
turn off the power to the heating element should the internal temperature of the
heater exceed normal levels. If this should happen the heating element will turn off,
but the fan will continue to run to help cool the heater. Should this condition occur
immediately remove any obstructions and set the heater on a level surface. When the
temperature returns to normal levels power to the heating element will be restored and
the theater should function normally.
3.This heater is equipped with a safety tip-over switch which automatically shuts off the
heating element if the heater is not in the upright position. The heater will resume back
to normal when the heater is returned to the upright position.
CARE AND MAINTENANCE
Dust, dirt, pet fur, etc can diminish your heaters performance and can lead to unwanted
odors. For best performance clean your heater frequently, at least once per season.
ALWAYS TURN OFF AND UNPLUG THE HEATER BEFORE CLEANING.
1.Turn Heater OFF, unplug it and wait for the heater to become cool.
2.Use a dry cloth to clean only external surfaces of the heater.
3.A vacuum with soft brush may used to clean louvered areas.
4.Wrap and tie the cord to protect it from damage.
5.Repack the heater in its original carton and store it in dry place.
NEVER
attempt to open or service the heater yourself. Doing so may cause damage
or personal injury.
TROUBLESHOOTING
PROB
PROBLEM
LEM B
POSSIBLE CAUSE
LE
CAUSE
CORRECTIVE ACTION
OR-
RECTIVE ACTION
Your heater shuts off
unexpectedly or fails to
operate.
1. No electric power.
2. One of the safety features
may have activated to
prevent overheating,
including the tip-over
safety switch.
1. Be sure the power cord
is plugged into a working
electrical outlet.
2.Check your thermostat
setting.
The heater may be off
because it has reached the
desired temperature setting.
