PLEASE READ BEFORE OPERATING
PRE-OPERATING INSTRUCTIONS
1.Carefully remove your heater from box. (Please SAVE the Box for off season storage).
2.Make sure the heater is switched OFF before plugging the heater into the outlet. Connect
to properly grounded outlets only. Note: The power cord has a polarized plug (with one
blade wider than the other) that will only fit in a polarized outlet one way. If it does not
insert easily try reversing the plug. If it still does not fit contact your electrician to replace
your outlet. DO NOT defeat the safety purpose of the polarized plug.
3.Place heater only on a firm level surface, free from obstructions and at least 3 ft. away
from any wall or other objects such as curtains, plants, etc.
4. Avoid overloading your circuit by not using other high wattage appliances in the same
outlet.
HOW TO USE YOUR HEATER
1.Completely uncoil the cord and plug heater directly into a 110~120 Volt grounded AC wall
outlet. Be sure the plug fits tightly. A loose fit will cause overheating and damage the plug.
Plug and cord may feel warm during normal usage. Avoid extension cords. (See # 9 above)
2.Choose your Power Setting:
High, Low, Fan or OFF. Use the HIGH setting to warm the room quickly.
After your comfort level has been achieved you may want to switch to the LOW setting to
conserve electricity.
3.Thermostat: Turn to highest setting (clockwise) until desired room temperature is reached.
Slowly rotate the knob counter-clockwise until the heater cycles OFF. At this SET POINT
the heater will cycle ON and OFF to maintain this comfort level.
FAN ONLY
1.Simply turn the control knob to the FAN setting to enjoy the gentle breeze.
CAUTION
Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause FIRE, ELECTRIC SHOCK or injury to persons.
IMPORTANT SAFETY FEATURES
• The safety pilot light marked POWER is illuminated when the control is turned to FAN,
HIGH or LOW.
• This heater is equipped with an AUTOMATIC OVERHEAT SAFETY DEVICE that will turn
off the power to the heating element should the internal temperature of the heater exceed
normal levels. If this should happen the heating element will turn off, but the fan will
continue to run to help cool the heater. Should this condition occur immediately remove
any obstructions and set the heater on a level surface. When the temperature returns to
normal levels power to the heating element will be restored and the theater should function
normally.
• This heater is equipped with a safety tip-over switch which automatically shuts off the
heating element if the heater is not in the upright position. The heater will resume back to
normal when the heater is returned to the upright position.
E-4
