E-4
c
a
b
Left
Front
Door
Right
Front
Door
Knob
U
V
T
10. Locate Center Back Panel (R), attach to the
center back of the completed assembly from
step 9, using a Phillips head screwdriver,
tighten Screws (Q) through the pre-drilled
holes in the Center Back Panel to the
completed assembly.
11. Attach Side Back Panels (R) to the back of
the completed assembly from step 9. Use
a Phillips head screwdriver, tighten Screws
(Q) through the pre-drilled holes in the side
back panels (R).
12. Locate Right Front Door (U) and Left Front
Door (T). Slide door hinge keyhole into
panel hinge bracket.
(Diagram 1)
Use Phillips Head Screwdriver to tighten
screws.
(Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward
change keyhole slot position.
(As Shown In Diagram 3a)
To adjust door right or left loosen/tighten
screw.
(As Shown In Diagram 3b)
To adjust door up or down adjust bracket
height.
(As Shown In Diagram 3c)
13. Attach the Knob (V) to the Left Front Door
(T) and Right Front Door (U), use the bolts
attached through the pre-drilled holes in the
doors. Then use a Phillips Head Screwdriver
to tighten the bolts.
Q
Center Back Panel
R
R
Side
Back
Panel
Side
Back
Panel
K