TWIN BUSCH GmbH
Technical changes for purposes of a technical advancement as well as deviation in colour, errors and printing mistakes are reserved.
page 3 of 45
1.
Safety warnings
1.1 Important notice
The manufacturer will take no responsibility for improper installation, improper usage, overloading or non suitable ground
for mounting the lift.
This model is specially designed for lifting vehicles up to the specified weight. Usage for other purposes will not be covered
by the manufacture or the dealer for accidents or damage. (Weight distribution see diagram page 22)
Pay careful attention to the approved weights! The warning stickers on the lift show the specifications. Never attempt to lift
vehicles above the specified weight!
Always read the manual carefully to avoid damage or accidents through misuse.
(Weight, wheel base and vehicle sizes, see Diagram page 43
)
1.2 Qualified personnel
1.2.1 Only qualified and trained staff should be allowed to operate the lift.
1.2.2 The electrical connections should be carried out by an electrician.
1.2.3 People or customers are not allowed in the lift and working area.
1.3 Safety warning
1.3.1 Never mount the lift on asphalt or other soft surfaces.
1.3.2 Read the safety warnings thoroughly before using the lift.
1.3.3 Never leave the control panel when the lift is in motion
1.3.4 Always keep hands and feet away from moving parts especially when lowering the lift.
1.3.5 Only qualified trained personnel are allowed to operate the lift.
1.3.6 Always ware suitable clothing
1.3.7 The lift and surrounding area should be kept clean to avoid accidents
1.3.8 The lift is designed to lift complete vehicles which do not exceed the lifting capacity. (See page 22).
1.3.9
Make sure that all safety locks are engaged before any attempt is made to work under or near the lift
. Never
remove any safety related components from the lift and do not use if such parts are damaged or missing.
1.3.10 Do not rock the vehicle or cause excessive weight displacement by removal of heavy parts when working on the lift.
1.3.11 All moving parts of the lift should be regularly maintained and checked. Should any parts be damaged, work on the
lift should be stopped immediately and you should contact the service partner for advice.
1.3.12 When not in use the lift should be lowered completely to the floor and the electric turned off.
1.3.13 If the lift is not used for a longer period of time, it is recommended to:
a. Disconnect the power source.
b. Empty the oil tank.
c. Lubricate the moving parts with grease.
