twin busch TW 242 E Page 4 Installation, Operation And Maintenance Manual Download

Page: 4 / 45

TWIN BUSCH GmbH

Technical changes for purposes of a technical advancement as well as deviation in colour, errors and printing mistakes are reserved.

page 4 of 45

1.4 Warning signs

All safety warning labels are clearly depicted on the lift to ensure that the operator is aware of dangers during operation.

Warning labels should be kept clean and replaced when damaged or missing.

Please read the

instruction manual

and saftey warnings

before using!

Repairs and

maintenancem only by

qualied personnel, do not

tamper with lift safety

devices!

Always keep escape

routes free!

Always take care of your

feet when lowering!

Use of the lift by qualied

personnel only!

Only quali ed personnel

are allowed within the lift

working area!

No persons under the lift

(when lifting or lowering)!

Never climb on the lift!

Use only the vehicle

manufactures

recomended lifting

points!

Never exceed the

recomended lifting

capacity!

Never try to lift using only

one side of the lift!

Avoid excessive shaking

of the vehicle!

Check vehicle for

security

shortly after lifting!

Attention when removing

heavy vehicle parts!

Protect the lift against

damp, especially the

electrical connections!

ATTENTION!

Danger of shock!

ATTENTION

Summary of Contents for TW 242 E














































Search results

Summary of Contents for TW 242 E

Reviews:

Related manuals for TW 242 E

Brands by name

Popular brands

twin busch TW 242 E, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for TW 242 E

Reviews:

Related manuals for TW 242 E

Brands by name

Popular brands