SET-UP AND SAFE OPERATING PROCEDURES
4-13
89210007
4.
Remove the conductor tube by
unscrewing the nut at the base.
5.
Pull the liner out and replace.
Repeat steps 1-4 in reverse order to
reassemble the gun.
4.03 CHANGING THE DRIVE ROLLS
NOTE
Turn power supply OFF before replacing drive rolls.
1. Remove the screws which secure the
upper and lower drive rolls. It may be
necessary to remove drive roll side of
gun case to change lower drive roll
(see steps 2 and 3).
2.
Loosen four handle screws. Turn
ring on the bottom of the handle
(surrounding the speed control knob)
one-quarter turn counter-clockwise,
and remove.
Care and Maintenance
