12
Preparing for Use –Thin Tube
Preparing for Use –Thick Tube
13
Your TweakConnect package includes
two sets of accessories: 1) a pack of
thin tubes and domes/tips plus,
2) an earhook power accessories
pack. (See page 7 for included
Preparing for Use –Thin Tube
Preparing for Use –Thick Tube
grasp the ear tip with one hand
and the tube with the other and
pull the ear tip off. To install the
new ear tip, push it straight onto
the tube.
The larger and closed domes will give you more bass
sound and permit more volume with less chance of
feedback. The smaller domes and sleeve tip give the
greatest comfort and most “open” sound.
Connecting the Thin Tube to the Amplifier
Align the tube connector end
with the end of the amplifier,
then
push the tube straight
onto the sound post.
components.) Text code on the sound tube, near
the tip represents the length of tube (2B) and which
ear. Blue=Left. Red=Right.
Changing the Ear Tip
In order to get the most comfortable fit, you may
want to try the different ear tips. To change, simply
If you’re using the earhook instead of the thin tube,
follow the instructions below.
Connecting the Earhook to the Amplifier
From the earhook accessory pack
(see page 7), choose the earhook
then attach it to the amplifier by
pushing it straight onto the
post
until the two flat surfaces
are flush together.
Position Amplifier and
Sound Tube on the Ear
Position the amplifier with the
attached earhook over the ear as
shown.
Measuring the Sound Tube
Next, insert dome comfortably
into the ear canal and align the
sound tube towards the end of
the earhook as shown. Mark the
location where the sound tube
crosses the earhook.
