twall Premium64, User Manual

Page: 10 / 40

t
wall ® Premium64 standard Color mobile / stationary User manual | Rev. 1.0.3
10 |E
3.1.3 Assembly instructions
3.1.3.1 Assembling the frame base
I. Mounting the frame base profiles:
Step

Please remove the packaging
material. You may use this as a protective pad
during assembly to avoid components being
scratched or damaged.
Step

Before you start putting together
the frame base
A1 (fig. 3.1-3)
, please attach
all the profile connectors to the provided
positions at the frame base profiles first. Four
(4) profile connectors should be kept for the
side supports of the aluminium frame. In
order to fasten the profile connectors, the
chamfering should point towards the cross
piece which is indicated by the mark at
the anchor
(fig. 3.1-2)
. The set screw will
be slightly screwed into the cross piece with
the corresponding Allen key. The anchor will
be drawn into the profile automatically. It is
important that you can still see the neck of the
anchor
(fig. 3.1-4)
to be able to insert it into
the lead channels at a later point
(fig. 3.1-5)
.
It might be the case that you need to push the
anchor slightly against the cross piece while
screwing it in.
Step

Shove the two (2) frame base
profiles
A1d
into the lead channels of the
frame profiles
A1a
and
A1b (fig. 3.1-5)
.
Please ensure that the cross pieces of the
connectors in the frame base profiles
A1d
point inwards and the cross pieces of the
connectors in the frame base profile
A1b
point outwards.
Step

Now shove the frame base
profiles
A1c
, one to the right and to the
left, into the lead channels of the frame base
profile
A1a
. Align the outer edges of the
profiles so they can be flushmounted. The
cross pieces of the connectors should point
outwards. Now tighten the profile connectors
with the corresponding Allen key (ca. 25 Nm).
Step

Measure the distance between
the frame base profiles
A1c
and
A1d
.
The distance has to be 42 cm (16.54 inch)
between the inner edges. Once you have
fastened the frame base profiles
A1c
and
A1d
you can strongly bolt together all other profile
connectors (ca. 25 Nm)
(fig. 3.1-6)
.
fig. 3.1-6
fig. 3.1-5
A1a
A1b
A1d
A1c
Operator side
lead channels
fig. 3.1-3
user's view
fig. 3.1-4
anchor neck
cross piece