TVU Transceiver & Receiver Set Up and Operating Guide
v5.5
8
Recommended firewall configuration for the Return Video Feed
This is a feature that can only be used on a TX3200 or GX3200 series Transceiver. It will
allow camera operator in the field have the ability to watch a return video feed from the
studio of their Pack transmission or from an SDI input at the Transceiver. To enable this
feature, please ensure that you permit all TCP/UDP incoming traffic for port 8488. This
port is configurable.
In order to view a TVUPack feed remotely, ensure that port 10003 is open for all
inbound traffic.
To view an SDI feed remotely, make sure that port 10004 is open for all inbound traffic.
Note: these are default ports, configurable if required.
For more details, please contact TVU support by phone at +1.650.440.4812, by email at
[email protected], or by skype at skype.tvupack.
Bandwidth Recommendations
Allowances should be made for bandwidth of incoming TVUPack transmissions based
upon the following criteria:
-
Each TVU receiver can utilize up to 20mbps of downstream bandwidth per
live Pack feed.
-
A minimum of 2mbps upstream bandwidth per Receiver is required for all
features to function efficiently.
We recommend a stable, low latency connection with guaranteed bandwidth for best
results.
