TVU Transceiver & Receiver Set Up and Operating Guide
v5.5
11
Transceiver Information
Displays input type and input format of the transmitter, which are displayed as T Input
and T Format respectively
(D)
(Figure 2). The output type and output format of the
transmitter are shown as R Output and R Format. Lastly, the IFB status and the IFB
Signal are displayed
(E).
The
IFB signal has a strength meter that depicts the input level
of the IFB. To stop the live transmission, users can press the “Stop” button on the status
panel
(G).
Figure 2
Refresh Button
If the video goes black or pixelates heavily and does not recover automatically within 15
seconds, click the Refresh button
(F)
to reset the video stream and reestablish the
connection (Figure 2).
Post-Live Histogram
The Quality button
(H)
allows users to access the post-live histogram (Figure 2). The post
live histogram allows users to recall a histogram of the entire past transmission and
display it as a Web-based graph to review the overall performance
(A)
of that
transmission over a certain period of time
(B)
(Figure 3). When the Quality button is
selected, users will be directed to a webpage where they can access the post-live
histogram.
Users can look at a transmission that took place on a specific date as well as monitor the
entirety of a live transmission
(C)
(Figure 3). The automatic refresh time can be set to a
desired length
(D)
and users can search for a specific transmitter by typing in the PID
B
A
C
F
E
D
G
H
