TVU Transceiver & Receiver Set Up and Operating Guide
v5.5
45
Configuration Steps to Stream Video
1.
Connect a laptop to the 4 port switch on the rear panel and apply power to the
LGR by setting the Power Supply rocker switch on the rear panel and by pressing
the front panel
Power
push button. Check the LCD to ensure that the
initialization process has completed.
2.
Browse to the default IP address of the LGR on the LAN at
http://
192.168.2.200
.
Log in using the UID/PW:
admin
/
admin
.
3.
Browse to Setup > Network Settings
4.
Set your IP address information in the WAN Configuration box and click
Save
.
5.
Browse to Setup > LGR outputs
a. Hit plus button on LGR outputs title bar
b. Name the TVU output
c. Select TVU as the input stream
d. Enter TVU Transceiver IP and Port 8088
NOTE
:
Port forwarding may be needed from LGR system to TVU transceiver
e. Save settings
Figure 37
6.
Apply power to TVUPack and wait for the initialization process to complete.
Ensure that you have installed fully charged batteries [or use DC input]. Batteries
