TVU Transceiver & Receiver Set Up and Operating Guide
v5.5
15
Note
: If there is no real-time GPS data for a particular TVUPack, cache GPS data will be
used for that Pack and the location pin will be yellow.
Figure 7
IFB Indicator
IFB Indicator
The five-color indicators are as follows (Figure 8):
•
Red:
IFB function is in use
•
Red-Gray:
Either the transmitter has gone offline
and the
IFB will recover when it
is back online or the transmitter goes live with a different receiver while you
were speaking with the Pack via the IFB function
•
Green
:
IFB function is connected but not in use
•
Green-Gray:
Either when the transmitter is live with another receiver or when
the transmitter is using the IFB function to speak with another receiver
•
Gray
:
IFB
Function not available for this transmitter
Figure 8
To use the IFB function, click the IFB indicator so that it turns red. The IFB on/off status
is also indicated in the “Status” panel on the left side of the interface. Additionally, if a
particular TVUPack has an IFB function, the IFB is automatically turned on when that
transmitter goes live. Once the live transmission is stopped, the IFB function will be
turned off.
