MAINTENANCE
BRAKES
1. Check the master cylinder brake fluid level
through the view piece glass (A).
YYou can observe a master cylinder (1) on the right
side of the handle bar, a caliper assembly (2) fitted on
the fork leg R along with a wheel speed sensor (3), a
disc (4) and a toner ring along with a cover (5) fitted on
the front wheel.
Front brake
Also you can observe a high pressure hose
connecting the master cylinder to the HECU of ABS
system and another high pressure hose connecting
HECU to the caliper assembly.
3. If the brake fluid level is below the mark or while
applying brake if you feel the brake is more spongy
or ineffective due to air entry, contact TVS Motor
Company Authorised Distributor or Dealer /
Authorised Service Center for topping-up the
brake fluid, air bleeding and other brake related
inspections.
2. Brake fluid level always should be above the
‘LOWER’ mark (B) on the master cylinder when
the master cylinder is parallel to the ground.
Note
Check the brake fluid level only when the master
cylinder is parallel to the ground.
A
1
2
5
3
4
B
72
