1. Remove the axle nut (1) along with a washer.
2. Pull out the axle (2) along with a washer and
remove spacer from both the sides of the wheel.
3. Place a support below the frame to prevent
vehicle from falling and lift the vehicle up.
5. Reverse the procedure for reassembling.
4. Carefully dislocate the disc from the caliper
assembly and slide the wheel out.
FRONT WHEEL REMOVAL AND REASSEMBLY
2. Remove the axle nut (1) and along with the washer
and partially pull out the axle (2).
4. Carefully hang the caliper assembly in the swing
arm itself. Take out the spacer and pull out the axle
fully.
REAR WHEEL REMOVAL AND REASSEMBLY -
Disc brake type
1. Remove the wheel hugger rear.
3. Take out the caliper assembly by dislocating it
from the disc and the swing arm lug.
5. Remove the wheel assembly by gently tapping it
along with the disc.
6. During re-assembly, engage the drum sprocket
with the wheel along with the drive chain and then
assemble the wheel into swing arm.
MAINTENANCE
1
2
Ensure to re-fix the right spacers at both the sides of
the wheel.
Ensure proper seating of disc in the caliper assembly
while reassembling the wheel.
Keep the toner ring upwards whenever the wheel is
removed in order to avoid damages to the toner ring.
Damaged toner ring affects ABS function.
Warning
79
