7. Re-assemble the other parts in the reverse order
of removal.
2. Remove the rear brake adjuster nut (1) and
disconnect the brake rod.
REAR WHEEL REMOVAL AND REASSEMBLY -
Drum brake type
1. Remove the wheel hugger rear.
5. Tilt the vehicle to the left and take out the wheel
assembly along with brake panel. Separate the
brake panel from the wheel.
6. For locating and reassembling the rear wheel
easily, engage the gear. This will arrest the free
movement of the drum sprocket. Reverse the
procedure for reassembly.
3. Remove the split pin (2) and the nut (3) from the
torque link mounting with the brake panel and
disconnect the torque link.
4. Remove the axle nut (4). Pull out the axle (5) and
take out the spacer bush from the rear wheel
assembly.
MAINTENANCE
Always make sure that whenever the wheel is
removed, axle nut is properly re-tightened to the
specified torque and chain play is re checked and
adjusted if required.
While assembling the caliper assembly ensure that
the slot provided in the caliper is properly located to
the lug provided in the swing arm assembly.
Caution
2
1
During removal of rear wheel axle hold the drum
sprocket assembly with the hand as it may fall.
Carefully hang the drum sprocket along with chain in
the swing arm itself.
Note
80
