Tvone CORIOmaster2 CM2-547, User Manual

Page: 36 / 124

Getting started with CORIOgrapher™
When you first open CORIOgrapher, you see Home .
n
If you've already set up your hardware, you can connect to your CORIOmaster2™ and get information about
its configuration of modules.
n
If you haven't set up your hardware yet, you can create a configuration offline. Or, you can load a
configuration from a file, if you have one. You can save your configuration, and send the configuration to
your CORIOmaster2 later. You can also use saved configurations to configure other CORIOmaster2 units.
Read about setting up hardware on page 25.
To connect to your CORIOmaster2 and get its configuration
The easiest way to get started using CORIOgrapher is to get the configuration of inputs and outputs directly from
your CORIOmaster2.
1. From
Home , select your CORIOmaster2 from Discovered Devices .
If your CORIOmaster2 isn't in the list, select Refresh .
If you can't see your CORIOmaster2, read troubleshooting advice on page 100.
2. Enter your administrator login details.
When you first log in as an administrator, enter the username
admin
and password
adminpw
. Leave the
Secure option clear.
If Host (IP or COM) doesn't contain an IP address, read troubleshooting advice on page 100.
3. When you are logged in to your CORIOmaster2, select Read to get its configuration.
PDF-CM2-547-V1.0 tvONE 30