Removing an input module from your CORIOmaster2™
Input modules fit in pairs, joined with a bridge rail. For each pair, the outside screws hold the module in place in
your CORIOmaster2, and the inner screws attach to the bridge rail.
1. Unscrew the outside screws of the pair that you want to change.
2. Use the silver handles or module extraction tools to pull the pair of modules forward, out of your
CORIOmaster2.
3. Unscrew the inner screw of the module you want to remove, and slide the module forward out of the bridge
rail.
Inserting an input module into your CORIOmaster2
Rules for placing input modules
Standard bandwidth input modules can go in any position in column A and B, slots 1, 2, 4, 5, 7, 8, 10, and 11.
High bandwidth input modules can only go in column B, slots 2, 5, 8, and 11.
Do not insert high bandwidth input modules in column A. The device and module can be damaged.
PDF-CM2-547-V1.0 tvONE
94
Summary of Contents for CORIOmaster2 CM2-547
Page 122: ......
