About your S/PDIF and analog audio module
You can use terminal block connectors to connect to a range of audio inputs and outputs.
INPUTS,
ANALOG
Connect an analog audio device.
INPUTS,
S/PDIF
Connect a digital audio device.
OUTPUT 1
S/PDIF
ANALOG
Connect an analog or digital device to play audio from the video installation on canvas 1.
OUTPUT 2
S/PDIF output. Connect a digital device to play audio from the video installation on canvas 2.
OUTPUT 3
S/PDIF output. Connect a digital device to play audio from the video installation on canvas 3.
STATUS(LED)
Indicates the status of the module. Green means that the module is working correctly. Red
means that there is a problem.
If any status indicator stays red, restart your CORIOmaster2. If that doesn't work, contact tvONE support. Contact
details are at the back of this guide.
Supported formats
The S/PDIF and analog audio module supports all audio formats outputted as PCM with a frequency of 48 kHz.
Inputs
Your S/PDIF and analog audio module has two inputs, one analog and one digital input.
You can use inputs from the S/PDIF and analog audio module as breakaway audio only.
What's breakaway audio?
Breakaway audio is independent of the windows on your video wall. It doesn't change when the sources playing
in your windows change. The audio is sent to all enabled outputs.
Outputs
Your S/PDIF and analog audio module has three outputs. Each output is locked to a canvas in
Editor
. Output 1 is
locked to canvas 1, output 2 is locked to canvas 2, and so on.
Output 1 has one analog and one S/PDIF digital port. You can send the same output to both ports, but you
cannot send a different output to each port. Because output 1 is locked to canvas 1, only canvas 1 is capable of
sending both analog and digital audio.
To choose a canvas, select a canvas number from
Canvas
.
Outputs 2-3 each have one digital S/PDIF output.
PDF-CM2-547-V1.0 tvONE
21
Summary of Contents for CORIOmaster2 CM2-547
Page 122: ......
