Presets
n
Do you want to use presets in your video wall?
n
What type of control system will you use to operate the video wall and change between presets?
What is a preset?
A preset stores information about windows, including positions, transitions, and effects such as borders or
rotation. You can save presets and recall them later from the dashboard.
Installing your hardware
Once you have planned and collected your hardware, you can set it up. First install your displays and place your
sources. Then connect your displays to your output modules and your sources to your input modules.
Who can do this?
Anyone can do this task, but we recommend that you consult a qualified AV installer.
Placing your CORIOmaster2™ and displays
When you decide where to place your hardware, consider these points:
n
Availability of electrical outlets
n
Distance from CORIOmaster2 to sources and displays
For best results at resolutions of 1080p60 or below with HDMI or DVI, use cables under 15 m long, or shorter
if you use connection adapters. If you need to place your products more than 15 m apart, use active optical
cables or a signal extender.
For best results at resolutions of 4K60 or higher with HDMI, use cables under 2-3 m, or shorter if you use
connection adapters. If you need to place your products more than 3 m apart, use active optical cables or a
signal extender.
.
n
Make sure your devices are within the operating specification.
n
Installation environment
In industrial environments, use shielded Ethernet cables.
PDF-CM2-547-V1.0 tvONE
25
Summary of Contents for CORIOmaster2 CM2-547
Page 122: ......
