C2-160 & C2-260 O
PERATION
M
ANUAL
76
resolution, whilst the green lines indicate the edge of blending. (G marks the green
lines, R marks the red, Y marks the yellow, for those reading in black and white.)
13.9
Alignment of projectors
This is possibly the most difficult part of properly setting up edge blending. Using
the guide lines, you need to fine-tune your projector positions and tilts so that the
above-mentioned red and green vertical lines perfectly overlap to produce yellow
ones.
Depending on how your projectors are aligned, you’ll get different results, each with
different solutions as detailed below:
Outputs 1A and 2B partly overlapping.
G R R G
Outputs 1 and 2 with guide lines shown.
G R R G
Outputs 1A and 2B perfectly overlapping – the red
and green lines turn to yellow when aligned
together.
Y Y
