6
c)
3.5mm Mini-jacks:
Connect to source's L/R output with 3.5mm mini-jack for
audio signal conversion.
NOTE: For HDMI signals you can select in the OSD Menu whether you require audio from the HDMI
(AUTO) or from the analog audio input (EXT).
d)
YPbPr + L/R:
Connect to source equipment such as a DVD player for both
video and audio signal conversion.
e)
CV + L/R:
Connect to a composite video source such as a video/DVD player
for both video and audio signal conversion.
6
CONTROL:
This port is the link for Telnet or Web GUI controls, connect to an active
Ethernet link with an RJ45 terminated cable
7
POWER:
Switch this power toggle to turn on and activate the device or turn off to
shut it down.
8
DC 5V:
Connect the power adaptor included in the package.
Connect the furnished AC Adaptor to the 1T-VS-668. (Use only the furnished adaptor to
avoid the possibility of equipment damage due to over-voltage or under-current from
generic AC Adapters). Next, connect the appropriate cables to the Input(s) and Output(s)
and turn on the destination and source devices.
Plug the AC Adapter into the AC wall outlet flip the rear power switch to the ON position
and if necessary press the ‘POWER’ button on the front of the unit. Verify that the LED
above the button lights green which indicates that power has been applied to the 1T-VS-
668.
NOTE: To realize maximum quality and performance, use only the highest quality cables with the 1T-VS-668. Low quality
cables will cause degradation of the signal quality and limit the distance between both the source and destination
devices and the 1T-VS-668.